Installing HP System Management tools in vSphere

So I had this issue where I needed to modify RAID controller settings and add more drives on a DL380 G6 running VSphere 4.0 Update 1 while in production with no downtime.
Here’s how it’s done:

Download the “HP Management Agents for VMware ESX 4.x” here and the “HP Array Configuration Utility for Linux” here.

Using the vSphere client utility to copy the files to the server preferably in a new folder.

Now, SSH into the server and CD into the directory where the new files are and extract the .tgz file by run the following:
tar -zxvf hpmgmt-8.3.0-vmware4x.tgz

now run the shell script using the –install switch:
./hpmgmt/830/ –install

install the ACU by running:
rpm -i cpqacuxe-8.35-7.0.noarch.rpm

enable remote ACU control:
cpqacuxe -R

And that’s it.
Now you should be able to access the HPSIM homepage by browsing to
logging in with your vSphere root credentials, and now you should have a link to ACU at the homepage.


The correct URL for the HP System Management page is:

Easily display CDP connection info

Here’s a quick one-liner to efficiently display CDP (Cisco Discovery Protocol) information on your windows PC. I must give credit to this post.

First of all, download and install WinPcap and a copy of WinDump.exe here. WinDump is a runtime .exe, so no installation is necessary.

Now, WinDump is a command-line utility, so to easily access it, I recommend you put it in your windows or system32 directory so you can easily access it from the command-line in any working directory.

Use WinDump.exe -D to get your network connection’s identifier string.
C:WinDump.exe -D
1.DeviceNPF_{FD16AF8D-2700-46D5-8C2B-759B0C54991A} (Sun)
2.DeviceNPF_{39E87FB9-DB40-4476-8B05-601AB3F4CC08} (Microsoft)
3.DeviceNPF_{6588B9CB-A7E7-4998-A780-3652193EA45B} (Intel(R) PRO/1000 PL Network Connection)

Here’s the command format I use:
C:WinDump.exe -nn -v -i DeviceNPF_{6588B9CB-A7E7-4998-A780-3652193EA45B} -s 1500 -c 1 “ether[20:2] == 0x2000”

The command breakdown is similar to what is on the original post sample.
-nn displays output in numeric only format
-v displays verbose information
-i specifies the interface to use for the captures
-s specifies packet byte size to be snagged
-c exits the program after capturing one packet matching bytes 20 and 21 from the start of the Ethernet header for a hex value of 2000

The output of the command above after successfully capturing a CDP packet looks like this:
15:50:59.355171 CDPv2, ttl: 180s, checksum: 692 (unverified), length 418
Device-ID (0x01), length: 11 bytes: ‘Switch2’
Address (0x02), length: 13 bytes: IPv4 (1)
Port-ID (0x03), length: 19 bytes: ‘GigabitEthernet1/2’
Capability (0x04), length: 4 bytes: (0x00000029): Router, L2 Switch, IGMP snooping
Version String (0x05), length: 289 bytes:
Cisco Internetwork Operating System Software
IOS ™ Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(13)EW1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support:
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 18-Mar-03 07:33 by hqluong
Platform (0x06), length: 15 bytes: ‘cisco WS-C4507R’
Prefixes (0x07), length: 5 bytes: IPv4 Prefixes (1):
VTP Management Domain (0x09), length: 5 bytes: ‘vtpdomain’
Native VLAN ID (0x0a), length: 2 bytes: 129
Duplex (0x0b), length: 1 byte: full
AVVID trust bitmap (0x12), length: 1 byte: 0x00
AVVID untrusted ports CoS (0x13), length: 1 byte: 0x00

This info is great, there is lots of useful data: switch name, ip, interface, switchport native vlan, vtp domain, etc. But is not immediately clear what’s on the other end. So here’s a little bit of help.

I put this command and others in a batch file to simplify things and to initiate CDP capture from an icon. Start the batch file with the WinDump command and have the output echo into a .txt file.
WinDump.exe -nn -v -i DeviceNPF_{6588B9CB-A7E7-4998-A780-3652193EA45B} -s 1500 -c 1 “ether[20:2] == 0x2000” >RESULT.txt

Now, using the Find command, have it search the RESULT.txt file and output the data you like as so:
FIND /I “Device-ID” RESULT.txt
FIND /I “Port-ID (0x03)” RESULT.txt
FIND /I “Address (0x02)” RESULT.txt
FIND /I “Native VLAN ID (0x0a)” RESULT.txt

So now, just run the batch file, and when a CDP packet is captured, the output will display only the data you need as so:
Device-ID (0x01), length: 11 bytes: ‘Switch2’

Port-ID (0x03), length: 19 bytes: ‘GigabitEthernet1/2’

Address (0x02), length: 13 bytes: IPv4 (1)

Native VLAN ID (0x0a), length: 2 bytes: 100

This little script saves me so much time everyday, and is a great alternative to commercial software that does the same. If anyone has any ideas to help make it better, please let me know!